Anamorphic squeeze
1×, 1.33×, 1.5× and 2× — true desqueezed field of view.
Live depth of field, field of view and focus limits with searchable camera profiles and manual lens controls. Built for photographers, cinematographers and focus pullers.
Change focal length, aperture, or focus distance and see the calculated near limit, far limit, total depth of field, and hyperfocal distance update immediately.
See exactly how your near and far limits open and close across the whole move, so you can mark the pull before the camera rolls.
Save setups by project and tag, generate a shot card with a scannable QR payload, and hand the same visible focus marks to the crew with the iOS share sheet.
1×, 1.33×, 1.5× and 2× — true desqueezed field of view.
Horizontal, vertical & diagonal angles, plus frame size at the subject.
Know your hyperfocal distance and where diffraction starts to bite.
Dial focal length, aperture and distance by feel with tactile stops.
Core optical calculations run on-device. No signal required on set.
Generate focus-mark cards with a QR code and use the iOS share sheet.
Dial in hyperfocal for landscapes, nail razor-thin portraits, and know your sharp zone before the shot.
Anamorphic squeeze, delivery-resolution sharpness and field of view for every sensor and prime in your kit.
Chart the pull, build shot cards, and hand consistent calculated focus limits to the crew.
Depth of field is the distance between the nearest and farthest points in a scene that appear acceptably sharp. It depends on focal length, aperture (f-stop), focus distance, sensor size and the selected circle-of-confusion standard. DoF Mate calculates the near limit, far limit and total depth of field for the setup you enter.
Hyperfocal distance is the focus distance that keeps everything from half that distance to infinity acceptably sharp. It is derived from focal length, aperture and the circle of confusion for your sensor. DoF Mate shows your hyperfocal distance live as you change any setting.
Yes. Every calculation runs entirely on your iPhone, so DoF Mate works with no signal — on location, in a studio, or anywhere on set. The camera sensor database is bundled and can refresh when you do have a connection.
DoF Mate includes starter camera profiles for offline use and can refresh a broader searchable sensor database when a connection is available. You can pair a profile with manual focal length and aperture controls, including 1×, 1.33×, 1.5× and 2× anamorphic squeeze factors.
Measure or estimate the subject distance using the same method you trust on set, then enter it with the focus-distance gauge. DoF Mate does not claim to replace a tape measure or calibrated rangefinder.
DoF Mate is free to download and the full calculator — depth of field, field of view, hyperfocal, anamorphic and framing — is free to use. A one-time or subscription Pro upgrade unlocks unlimited saved setups, project organization, focus-pull charts, PDF setup reports and shot cards.
Download DoF Mate and carry a full focus instrument in your pocket — free to start, no account needed.